samsung rf268 series refrigerator manual

The Samsung RF268 Series is a French Door Refrigerator with advanced cooling technology, Twin Cooling Plus system, digital inverter compressor, FlexZone drawer, ice and water dispenser, LED lighting, adjustable shelves, gallon door bins, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using the FlexZone Drawer 7. Ice and Water Dispenser 8. Maintenance & Cleaning 9. Energy Saving Tips 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: French door design, external ice and water dispenser, digital temperature controls, adjustable glass shelves, humidity-controlled crispers.

FeatureDescription
Twin Cooling PlusSeparate cooling systems for fridge and freezer
Digital Inverter CompressorEnergy efficient and quiet operation
FlexZone DrawerConvertible temperature zone (fridge/freeze)
Ice & Water DispenserExternal access with filtered water
LED LightingEnergy-efficient interior lighting
Adjustable ShelvesCustomizable storage configuration
Gallon Door BinsLarge capacity door storage
Humidity ControlPreserves freshness in crisper drawers
Door AlarmAlerts when door left open
Energy Star CertifiedMeets energy efficiency standards

Installation

Unpack and inspect contents. Position refrigerator in desired location.

  1. Remove all packaging materials and tape.
  2. Level the refrigerator: Adjust front leveling legs.
  3. Connect water line: For ice maker and water dispenser operation.
  4. Plug into dedicated 115V AC power outlet.
  5. Allow 24 hours for cooling system to stabilize.

WARNING! Ensure proper ventilation space around refrigerator. Do not install near heat sources.

First-Time Setup

After installation, complete initial setup procedures.

  1. Set temperatures: Recommended 37°F for fridge, 0°F for freezer.
  2. Activate ice maker: Lift the wire signal arm to begin ice production.
  3. Configure FlexZone: Set temperature for fridge or freezer mode.
  4. Test water dispenser: Flush system for 3 minutes to remove air.
  5. Arrange shelves: Customize layout for your storage needs.

CAUTION! Do not overload shelves. Distribute weight evenly.

Specifications

Controls and Settings

Access controls via digital display panel on refrigerator door.

Temperature Controls: Fridge (33-45°F), Freezer (-8 to 5°F), FlexZone (-8 to 41°F)

Display Functions: Power Cool, Power Freeze, Ice Type (cubed/crushed), Filter Reset, Door Alarm, Sabbath Mode, Child Lock.

Settings Menu: Temperature units (°F/°C), water filter indicator, diagnostic mode, factory reset.

Using the FlexZone Drawer

The FlexZone drawer offers convertible temperature settings.

  1. Select mode: Press FlexZone button on control panel.
  2. Choose temperature: Fridge mode (33-41°F) or Freezer mode (-8 to 5°F).
  3. Recommended uses: Fridge mode for beverages, deli items; Freezer mode for frozen goods, ice cream.
  4. Adjust shelves: Customize drawer interior for different item sizes.

Tip: Allow 2-4 hours for temperature changes to stabilize.

Ice and Water Dispenser

External dispenser provides ice and filtered water.

  1. Select ice type: Cubed or crushed ice options.
  2. Dispense water: Press water button; hold glass against paddle.
  3. Dispense ice: Press ice button; select type if available.
  4. Replace filter: When indicator light turns on (approx. 6 months).
  5. Clean dispenser: Wipe with soft cloth; use vinegar solution for mineral deposits.

WARNING! Do not use hot water to clean ice system. First-time ice production may take 24 hours.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Interior cleaning: Use baking soda solution (2 tbsp per quart water).
  2. Exterior cleaning: Use mild detergent and soft cloth.
  3. Condenser coils: Vacuum every 6-12 months.
  4. Door seals: Clean with warm water and dry thoroughly.
  5. Ice maker: Empty and clean every 3-6 months.

CAUTION! Unplug refrigerator before cleaning. Never use abrasive cleaners.

Energy Saving Tips

Maximize efficiency and reduce energy consumption.

Regulatory Information

UL listed and Energy Star certified. Complies with FCC Part 15 for digital devices. Manufactured by Samsung Electronics. For support, visit www.samsung.com or contact 1-800-SAMSUNG. Water filter certified by NSF International. Refrigerant: R-600a (isobutane).

Troubleshooting

SymptomPossible CauseCorrective Action
Refrigerator not coolingPower/thermostatCheck power connection; ensure thermostat set correctly.
Water dispenser not workingFilter/water supplyReplace water filter; check water line connection.
Ice maker not producing iceFreezer temp/arm positionEnsure freezer at 0°F; check signal arm position.
Excessive frost in freezerDoor seal/warm airCheck door seals; minimize door openings.
Unusual noisesLeveling/objectsLevel refrigerator; check for items touching walls.
Water leakageDrain line/connectionsCheck drain line for clogs; inspect water connections.

Reset: Unplug for 5 minutes, then reconnect power.

Service: 1-800-SAMSUNG; www.samsung.com/support

Samsung RF268 Series Refrigerator Manual © - All Rights Reserved 2025